Cut a length of 20 gauge wire the same length as the tool, approx.
2". Lay the wire down so that it matches up to with the mark, see
small pic, give the wire a little bend with your finger.
Using the Eye Winder, slip it over the eye dowel and twist. Make perfect
eyes every time.
Press the lever shown to make the shank.
Wrap the wire around, if you cut the wire the length of the tool, you
won't have excess, it will match up to the end when you press the second
lever. Wire shown longer so it is easier to see.
Press the second lever and you are finished. Add some coils and/or
beads and you have a unique and customized ear wire.
Also included in the instructions are how to make the no shank ear wires.
You can decorate the shanks with beads and/or coils, most 3-4mm beads will slide right on to the shank. You can also create matching eye pins or long shank ear wires to decorate with your favorite beads.
